Categorieën
Switc Non latching red led IP67
20,00 € 20,00 € 20.0 EUR
Switch latching green led IP67
20,00 € 20,00 € 20.0 EUR
CAN-BUS Keyboard 4 pos.
218,01 € 218,01 € 218.01 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 6 pos.
269,00 € 269,00 € 269.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 8 pos.
289,00 € 289,00 € 289.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 10 pos.
299,00 € 299,00 € 299.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 12 pos.
309,00 € 309,00 € 309.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
Mux Switch Board
12,00 € 12,00 € 12.0 EUR
Lambda to can
199,00 € 199,00 € 199.0 EUR
Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via CAN-BUS. Two programmable 0-5V analog signal lines are available, along with the CAN transmission.
The controller uses a dedicated Bosch integrated circuit paired with an automotive grade digital controller to precisely manage the oxygen sensor and calculate Lambda and AFR.
Multiple controllers may be used at the same time on one CAN–BUS, lending installation flexibility.

Key features
•Bosch LSU 4.9 support (ADV version also available)
•Operating voltage range: 9 -16V
•Current consumption: up to 3A (during warm up)
•IP65 enclosure
•2 programmable analog outputs 0-5V
•Communication and setup: CAN 2.0A/B

Wheelspeed to CAN
299,00 € 299,00 € 299.0 EUR
The Wheel Speed To CAN device is designed to measure frequency-type signals from 4 separate sensors and send that data over CAN BUS.
Rotary switch
25,00 € 25,00 € 25.0 EUR
8 Position Rotary Switches can be used to control various ECU functions such as Traction Control and Boost Control settings.
Installation is simple, just connect 5V supply, sensor ground, and the output signal.
Rotary switches can be connected to any unused analog input on the EMU, EMU Black, or PMU16.
EGT to CAN 8ch
149,00 € 149,00 € 149.0 EUR
The EGT to CAN module collects input signals from 8 EGT probes (K-Type thermocouples), converts the probe voltage into a numerical temperature figure and sends the appropriate data via a CAN bus. The module is fully configurable using USB connection and Microsoft Windows based client software. High quality EGT sensors are available on request.

Using ECUMASTER EMU engine management it is possible to trim each cylinder fuel dose based on EGT temperatures readings.

Up to 8 EGT probes,
Cold junction compensation
0-1250C input range
CAN 2.0 compatible
Configurable CAN bitrate, byte order (Intel, Motorola), message IDs
USB port for PC connection
Client software for configuration and temperature monitoring
Switch non latching red led IP67
20,00 € 20,00 € 20.0 EUR