Categorieën
Battery Isolator Club
375,00 € 375,00 € 375.0 EUR
Ecumaster Battery Isolator is een motorsport-masterrelaisapparaatontworpen voor FIA-conforme batterij-isolatie en motoruitschakeling.
Het apparaat is ontworpen voor zware motorsportomgevingen en weegt
slechts 83 gram. Met een volledig solid-state ontwerp, een afwezigheid van mechanische
componenten zorgen voor een lange levensduur en hoge betrouwbaarheid.

•Weight: 83g
•Dimensions: 50mm x 100mm x 38.5mm
•Voltage range: 6V – 19V, 28V transient
(12V automotive installations only)
•Operating temperature range: -40C + 125C
•Current capability: 300A continuous, peak up to 1000A
•Current measurement resolution 4A
•Current measurement range: -1000A to 1000A
•Current measurement accuracy: ±10%
•Inductive load switching capability: 600mJ
•Enclosure: Anodized aluminium, IP67 rated
• High current terminals: M8 nickel plated terminals
or Radlok connectors
•Signal connector: Deutsch ASX202-06PN
(mating plug ASX602-06SN included)
•Power save state current consumption: <1mA
•ON state current consumption: ~20mA
•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z
Battery Isolator Autosport
399,00 € 399,00 € 399.0 EUR
Ecumaster Battery Isolator is een motorsport-masterrelaisapparaatontworpen voor FIA-conforme batterij-isolatie en motoruitschakeling.
Het apparaat is ontworpen voor zware motorsportomgevingen en weegt
slechts 83 gram. Met een volledig solid-state ontwerp, een afwezigheid van mechanische
componenten zorgen voor een lange levensduur en hoge betrouwbaarheid.

•Weight: 83g
•Dimensions: 50mm x 100mm x 38.5mm
•Voltage range: 6V – 19V, 28V transient
(12V automotive installations only)
•Operating temperature range: -40C + 125C
•Current capability: 300A continuous, peak up to 1000A
•Current measurement resolution 4A
•Current measurement range: -1000A to 1000A
•Current measurement accuracy: ±10%
•Inductive load switching capability: 600mJ
•Enclosure: Anodized aluminium, IP67 rated
• High current terminals: M8 nickel plated terminals
or Radlok connectors
•Signal connector: Deutsch ASX202-06PN
(mating plug ASX602-06SN included)
•Power save state current consumption: <1mA
•ON state current consumption: ~20mA
•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z
CAN-BUS Keyboard 4 pos.
218,01 € 218,01 € 218.01 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 6 pos.
269,00 € 269,00 € 269.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 8 pos.
289,00 € 289,00 € 289.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 10 pos.
299,00 € 299,00 € 299.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
CAN-BUS Keyboard 12 pos.
309,00 € 309,00 € 309.0 EUR
CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps, and 1000kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated
red "B789"
5,00 € 5,00 € 5.0 EUR
Battery Isolator Radlok Autosport
450,00 € 450,00 € 450.0 EUR
Ecumaster Battery Isolator is een motorsport-masterrelaisapparaatontworpen voor FIA-conforme batterij-isolatie en motoruitschakeling.
Het apparaat is ontworpen voor zware motorsportomgevingen en weegt
slechts 83 gram. Met een volledig solid-state ontwerp, een afwezigheid van mechanische
componenten zorgen voor een lange levensduur en hoge betrouwbaarheid.

•Weight: 83g
•Dimensions: 50mm x 100mm x 38.5mm
•Voltage range: 6V – 19V, 28V transient
(12V automotive installations only)
•Operating temperature range: -40C + 125C
•Current capability: 300A continuous, peak up to 1000A
•Current measurement resolution 4A
•Current measurement range: -1000A to 1000A
•Current measurement accuracy: ±10%
•Inductive load switching capability: 600mJ
•Enclosure: Anodized aluminium, IP67 rated
• High current terminals: M8 nickel plated terminals
or Radlok connectors
•Signal connector: Deutsch ASX202-06PN
(mating plug ASX602-06SN included)
•Power save state current consumption: <1mA
•ON state current consumption: ~20mA
•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z
Digital Gear Display
330,00 € 330,00 € 330.0 EUR
Steering knob panel
49,01 € 49,01 € 49.01 EUR
CAN switchboard V3
135,00 € 135,00 € 135.0 EUR
A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to this, the device has 4 built-in low side outputs that can be activated with a CAN bus message. The main purpose of this board is to build custom steering wheel panels containing buttons, rotary switches and indicators.

USB to CAN Module
119,00 € 119,00 € 119.0 EUR
The ECUMASTER USBtoCAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It is equipped with a LED status diode for fast diagnostic and a 120 Ohm terminator that can be switched on or off to relieve the user from applying external terminators.

This device is used to communicate with the PMU.
A version with galvanic isolation is also available.
Haldex drag controller
279,00 € 279,00 € 279.0 EUR
full control of torque transfer
vehicle speed based progressive rear disengagement
differential oil over-temperature protection
configuration and parameters logging using a Microsoft Windows client
Box 2-channel common rail
119,00 € 119,00 € 119.0 EUR
EDL-1 DataLogger/Bluetooth module
130,00 € 130,00 € 130.0 EUR
The EDL-1 data logger is a “must have” for any professionals using the EMU, EMU CLASSIC and the EMU BLACK device. Utilizing serial communication, this device is able to record over 200 data channels with a frequency of 25Hz.

Use of the popular SDHC cards with FAT32 file system means reading data on PC computer is fast and simple. The average data rate allows to record about 11 hours per 1GB of memory card space.

For time stamping there is built in battery powered RTC clock.

Additionally, the EDL-1 device is equipped with a Bluetooth module to communicate with an Android tablet device.
Hose tail 1/8 NPT
4,01 € 4,01 € 4.01 EUR
EGT to CAN 8ch
149,00 € 149,00 € 149.0 EUR
The EGT to CAN module collects input signals from 8 EGT probes (K-Type thermocouples), converts the probe voltage into a numerical temperature figure and sends the appropriate data via a CAN bus. The module is fully configurable using USB connection and Microsoft Windows based client software. High quality EGT sensors are available on request.

Using ECUMASTER EMU engine management it is possible to trim each cylinder fuel dose based on EGT temperatures readings.

Up to 8 EGT probes,
Cold junction compensation
0-1250C input range
CAN 2.0 compatible
Configurable CAN bitrate, byte order (Intel, Motorola), message IDs
USB port for PC connection
Client software for configuration and temperature monitoring
Bluetooth Can Bus Module
79,00 € 79,00 € 79.0 EUR
Wireless communication module to connect with mobile phones to ECUMASTER EMU.
With this Bluetooth module it's possible to connect you mobile or tablet device to the ECUMASTER EMU.

Only compatible with Android.

This module is connected true the Can Bus communication port.

The CAN Bus Bluetooth Adapter for the ECUMaster EMU Black allows for wireless display of ECU parameters on an Android tablet or phone. This adapter is for use with the CAN version of the EMU (6 pins on the expansion port as opposed to 5 pins on the normal EMU), or with a standard EMU with the CAN expansion module or with the EMU Black. If you have an EMU Classic with the 5 pin expansion port, purchase the serial Bluetooth adapter instead. The Android app allows the customer to customize the style and size of the gauges, as well as deciding which parameters to display. Gone are the days of clumsy gauge pillars and dashboards littered with gauges, as all critical information can be displayed on one device quickly and easily.
Bluetooth Module
79,00 € 79,00 € 79.0 EUR
Draadloze communicatie module dat wordt aangesloten op de uitbreiding van de ECU MASTER EMU.
Wireless communication module to connect with mobile phones to ECUMASTER EMU.
With this Bluetooth module it's possible to connect you mobile or tablet device to the ECUMASTER EMU.

Only compatible with Android.


module installation: With power supply turned off to EMU ECU, connect Bluetooth module to extension port at the rear of the ECU.
Turn On power supply to ECU. Bluetooth module indicates status with red LED diode.